Custom Designs

FP300-13.

300W lamp testing power supply (endoscopy / dental) to UL60601-1

300W fully programmable short arc xenon light source
Supplied to a US manufacturer of short-arc xenon lamps, this product offers a fully programmable light source for use within surgical applications.

Lamp ignition provided via >30kV trigger module provided internally or remote to the system
Programming and control achieved via membrane keypad or RS232 protocol Controlled variables: lamp current, lamp voltage, output power Modes of operation: continuous current supply, variable time, internal modulation, external modulation mode

Contact our sales team for details of the extensive features available. We can adapt this design for laser, plasma or any other high voltage application.

FP400-610.

400W AC-DC laser diode to IEC/EN60601-1

Supplied to a major European OEM of medical surgical equipment
400W laser current source for driving up to 35W CW laser diodes
Universal mains input 85-264Vac
Active PFC to EN61000-3-2 class D
Laser diode drive via constant current 60A (2V-5V) source
TEC output of 250W with reversible polarity
Additional auxiliary outputs of 5V, +/-15 and 29V provided
Diode output programmed via 0-10Vdc input with 0-10 dc current monitor signal provided for closed loop applications
Control features: laser enable control, safety interlock, TEC enable, TEC polarity, connection via IDC connector
Dimensions 225 x 190 x 63mm

FP700 LAMP BALLAST SUPPLY.

700W lamp ballast supply – endoscopy to UL60601-1

Supplied to a medical instrumentation equipment manufacturer
700W supply for lamp applications
Designed specifically for short-arc Xenon technology (30kV trigger voltage)
Topology utilizes ZVT switching for maximum efficiency, with adjustable current programming via digital potentiometer available
500W version also available
Mains input auto-select detection, output current and voltage monitor

Adaptable for plasma, laser and other high voltage applications
PFC version also now available

FP85-3XX.

85W battery backed baby ventilator to IEC/UL60601-1

Triple output product
Battery backup via external battery
Three outputs of 5.1V at 6A, 12V backed up from a 12V battery source (additional 13.8Vdc charge output provided)
Universal mains input 90 - 264Vac
Various battery charge monitoring signals supplied (open - collector)
Connection via Molex 0.156" and 20W mini-fit junior (ATX type)
Dimensions 202x152x47mm

FR55-410.

55W AC-DC hospital paging system

Replaced an obsolete Farnell / Advance product
Multi-output product on a baseplate with custom loom configured to specification
Features safety cover
Quad output configuration with output voltages as low as 1.5Vdc
Optional open collector powerfail, DC ok signals, universal input and up to 3 fully isolated outputs
Dimensions of psu: 5" x 3" x 1U: see FR55 series for more details

FP450-413.

450W AC-DC laser diode to UL2601 and CSA

Up to 4 outputs including one programmable constant current output
Universal mains input
Active power factor correction
Output inhibit signal
Output connections via M6 Studs and Molex terminals
Mains input is via screw terminal
Dimensions 330 x 62 x 127mm

FP150-710.

150W AC-DC for nerve stimulation to UL60601-1

Open frame convection cooled to fit within wedge shaped enclosure in a surgical application
Universal mains input at 90 - 264Vac
Active Power factor correction to EN61000-3-2 class D
7 fully regulated output voltage rails: +12/+12/-12/+5/+3V3/+24/-24V
All outputs protected for current overload and over voltage
Connections via Molex mini fit / Molex 0.156"
Dimensions 163 x 169 x 50mm

FS150-418.

150W AC-DC blood analyser to UL 60601-1

Quad output
Universal mains input of 90-164Vac
High peak power requirement to drive high current lamp via 24V output
4 outputs of 5V at 5A, +12V at 7A,-12V at 1A and 24V at 4A
Connection via Molex 0.156" and minifit junior
Dimensions 230 x 115 x 62mm

FS250-610.

250W AC-DC blood analyser to IEC60601-1

Multi output supply with up to 6 outputs
Mains input auto-select detection
Fan cooling
Connections via 0.156" Molex and 9mm screw terminals
Dimensions 229 x 61 x 122m

FP300-11.

300W xenon lamp ballast to UL60601-1

Designed specifically for short-arc Xenon technology - 30kV trigger voltage for lamp ignition
Topology utilizes ZVT switching for maximum efficiency
Features include mains input auto-select detection, integral lamp igniter and output current & voltage monitor
The topology of the product allows conversion to alternative lamp
applications including plasma, metal halide, mercury and amalgam
PFC version now available