FP750-48
(750W convection cooled -ac-dc psu)

Supplied to a manufacturer of optical drive equipment this 750W convection cooled product  offers as standard 0-48Vdc output.

Whilst designed to operate @ 90 - 264Vac with active PFC to EN61000-3-2 D this product is also operated within the application at 100Vdc input.

Features include output voltage programming via 0 - 10Vdc input control ( 10V @ 1A internal reference voltage supplied ), active current share for parallel operation, powerfail signal,inhibit/enable control.

Due to extreme climatic operating and storage conditions the product is also designed to withstand temperature down to -40Deg C.

Input / output connection via 0.375" Beau screw terminals whilst control options via 10 Way IDC.

Dimensions : 300 * 200 * 70mm.

FP950-1100 (950W for power analyser) Supplied to a major uk test instrumentation manufacturer for use within a power analyser this product offers a total power output of 950W with 11 fully regulated outputs. The product offers full universal mains input 90 - 264Vac with active power factor correction to EN61000-3-2 D. The product comprises of 2 independant converters comprising of one dual output high current with the other supplying 9 auxilliary outputs. Features include powerfail signal, inhibit / enable control and supplied with custom ATX style connection loom. Input connection via 0.375" Beau screw terminals with output via Molex Mini fit type. Dimensions : 300 * 200 * 120mm.

FP400-610
(400W laser diode power supply)

Supplied to a major European OEM of medical surgical equipment our FP400-610 offers a 400W laser current source for driving upto 35W CW laser diodes.
Features universal mains input ( 85-264Vac ) and active PFC to EN61000-3-2 class D. Laser diode drive via 60A (2V) current source  with TEC output of 250W with reversible polarity. Additional auxilliary outputs of 5V, +/-15 and 24V provided.

Output programming control and signalling via IDC connection. Power via Phoenix screw terminals.

Currently undergoing medical approvals to IEC/EN60601-1

Dimensions 225 x 190 x 63mm.

FP700 LAMP BALLAST SUPPLY
(700W lamp supply - medical -Endoscopy )

Supplied to  a medical instrumentation equipment manufacturer (to UL60601-1) the FP700 series offers a 700W supply for lamp applications. Designed specifically for short-arc Xenon technology ( 30kV trigger voltage ) the product is easily adaptable for plasma, laser and other high voltage applications.

Topology utilizes ZVT switching for maximum efficiency, with adjustable current programming via digital potentiometer available. 175W / 300W, 500W versions also available.

Features include mains input auto-select detection, output current & voltage monitor.

 (PFC version also now available - contact sales)

FR150-510  - 135W
(3U 19" rack mount linear psu - low noise - )

Supplied to a leading motor drive manufacturer the FR150-510(E128-210) is available in six different product formats and offers five fully regulated dc outputs of typically 5V, +/-15V and +/-24V.

The product is designed specifically for mounting within a 19" rack enclosure 3U x 21TE x 175mm* and incorporates high quality anodised front panel and handle. Connection for both input and output is to the rear via H15 DIN 41612 connector.
As the product incorporates linear technology the output RMS ripple and pk noise is extremely neglegible. Additional features include voltage test points, output LED indication and individual adjustment for each output via front panel. On/off control is via DPDT switch with external fusing also via front panel.

Available in 230Vac, 115Vac and 100Vac versions.

* Designed for 160mm deep enclosures - 175mm total including front panel and H15.

FP190-710
(190W for analysis equipment)

Supplied to a manufacturer of high specification analysis equipment this 190W product offers 7 outputs varying from 3v3 to 500Vdc.

Specific features include ac heater output for driving deuterium lamp, 100Hz TTL line synchronisation and active PFC to EN61000-3-2 D.

Housed in custom chassis with mains input via fused IEC socket and DPST switch.Output connections via Molex ' Mate n lock ' type.

Dimensions 340 x 178 x 75mm.

FP55-110
(55W dual range to 225Vdc)

Supplied to a major test and measurement equipment manufacturer the FP55-110 offers an output voltage of 11.5 to 55Vdc or 55Vdc to 225Vdc with range selectable via an external TTL logic signal.

Precise voltage adjustment is controlled via external potentiometer.

Additional features include universal mains input of 90-264Vac, Active PFC to EN61000-3-2 class D and output inhibit control. Connections via 0.1" and 0.156" Molex.

Dimensions 168 x 120 x 60mm.

FP200-910
(200W for analysis equipment)

Supplied to the instrumentation industry this open-frame 200W power supply offers up to 9 outputs comprising of 5 low voltage and 4 high voltage up to 600Vdc.

Features include active power factor correction to EN61000-3-2, universal mains input and TTL compatible 50Hz clock / sync signal.
Dimensions 140 x 250 x 70mm.

FP150-310
(150W for video mixing )

Supplied to a video systems specialist for 19" rack mounting this 150W product offers 3 high current outputs as standard with active PFC and universal mains input. Other features include 8HP front panel and 3U anodised front panel with power LED optional. Mains powerfail indication is supplied via volt free relay contacts. Height <1U if mounted horizontally. Depth 225mm.

Connections via DINN H15.

FP250-1010 (250W 10 output for atomic absorption ) Supplied to the instrumentation Industry,the FP250-1010 range offers 250W of power with 10 outputs comprising of 6 low voltage outputs and 4 high voltage outputs up to 500Vdc.AC heater output for lamp applications. Features include active power factor correction to EN61000-3-2, 50Hz TTL compatible sync output and universal mains input. Dimensions 250 x 250 x 70mm.

48FR300-310
(300W for telecoms - Marconi)

Supplied to the telecomms  industry the 48FR300-310 offers a 300W 48Vdc input convection cooled supply with 3 outputs available.

Features include hot swap capablity, 14HP front panel, power on LED, input and output OK alarms and current share.

Used within police and fire stations worldwide.

Connections via 2 * DIN 41612 H15
Dimensions 225 x 262 x 80mm.

FP300-710
(300W for test instrumentation)

This product is supplied to a manufacturer of high quality test equipment and offers 7 high current fully regulated outputs.

Features of this product include universal mains input of 90 - 264Vac with active PFC to EN61000-3-2 D. Main powerfail signal ( open collector ) and enable control supplied.

A special feature of this product was the ability to meet the high power demands for +5V and +3V3 outputs consequitivly.

Supplied with custom ATX style connection loom to customer specification

FR750-712
(750W for welding application)

Supplied to a user of motor controlled equipment this 750W supply offers up to 7 fully regulated outputs with 1 high current / high voltage output to 30A. Features include mains powerfail signal, near current limit monitor signal and LED indication of all outputs. Mains input is universal 90 -264Vac ( auto-select ) with connection is via IEC inlet with outputs via molex 0.156" and Beau screw terminals for high current output.

Active single wire current share for parallel operation.
Dimensions 227 x 68 x 200mm
(excluding fan ).

FP300-412
(300W for audio mixing console)

Supplied to a major uk manufacturer of audio mixing consoles the FP300-412 offers 4 fully regulated outputs.

Features include universal mains input 90 - 264Vac, active power factor correction to EN61000-3-2 D, power good signal, active current share and convection cooling.

V1 rated to 25A with V2,3 & 4 rated upto10A.

Connection via plug in Wago type.

Dimensions : 225 * 130 * 60mm.

FP75-3XX
(75W for baby incubation - medical)

This triple output 75W product supplied to the medical sector for use within baby incubation with approval to UL2601. Features include battery backup
 ( via external battery ).3 outputs of 5.1V@6A, 12V@2.8A, and 24V@0.8A
 ( battery charge output/input ). Universal maiins input 90 - 264Vac. Various battery charge monitoring signals supplied
( open - collector ).

Connection via Molex 0.156" and 20W mini-fit junior ( ATX type ).

Dimensions 202L x 152W x 47H (mm).

48FR400-210
(400W for video processing)

Supplied to the video / audio processing industry,the convection cooled 48FR400-210 series offers a 48V dc input supply for 19" rack mounting with dual output configuration via 48W DIN 41612 connection at rear. Input connection supplied via Molex mini fit senior type.

Features include 20mS hold up from 48Vdc @ full load, I²C interface providing full power supply status signals including dc input powerfail, output ok, over voltage, under voltage, over current, over temperature. Further signal indication provided via status LED's incorporated within 12HP 6U front panel.

S200/Z010 (now FS200)
(200W for Cincinnati 500 CNC control)

Supplied to a manufacturer of CNC control equipment the Z010 series offers a link selectable mains input with outputs of +5, -12V ,+12 and +12V accordingly.

Features include open collector mains power fail, thermal protection, over voltage and over current protection with internal connection via DIN 41612 H15 type. 

Note : Complete Control Techniques system shown - we only provide internal psu

FP250-120 : 120Vdc output
(250W for LCD display backlight < 1U format )

This 250W low profile product ( <1U ) offers an output voltage of 120Vdc @ 2.1A ( other available ) with universal mains input of 90 - 264Vac and active PFC to EN61000-3-2 D.

Additional features include optional enable/inhibit control, mains powerfail signal and active current share. Cooling via 2 * 40mm fans but available without if cooling available within system.

Connections via Molex 0.156" as standard but screw terminal available.

Dimensions 212 * 116 * 43mm ( excluding fans )

FR55-410
(55W for hospital paging)

To replace an obsolete Farnell / Advance product we are supplying our new FR55 ( 55W ) multi-output product on a baseplate with custom loom configured to specification.

Features include safety cover, quad output configuration with output voltages as low as 1.5Vdc, optional open collector powerfail and DC ok signals, universal input and up to 3 fully isolated outputs if required.

Dimensions of psu : 5" x 3" x 1U : see our FR55 series for more details

FP150-710
(150W for medical application)

This open frame convection cooled 150W product is supplied for a medical application involving nerve stimulation with full approvals to UL60601-1.

Mains input is universal @ 90 - 264Vac with active Power factor correction to EN61000-3-2 D. Features include 7 outputs, 4 of which are fully regulated with remaining 3 semi-regulated.

Mains input 90 - 264Vac with active PFC to EN61000-3-2. Connections via Molex mini fit / Molex 0.156".Dimensions 163 x 169 x 50mm

48FS200-121 (200W DC-DC convection cooled for data rack) This 200W DC-DC product was supplied to 3Net for use within a data comms application. The product features 32 - 72Vdc wide range dc input to BTNR 2511 standards and cooling via convection. Output voltage of 5V @ 40A as standard but other available. Features include active current share for parallel operation and powerfail indication. Output ok LED and powerfail LED supplied via front panel. Connection via H15 DINN to rear.

FP200-210
(200W for telecomms networks)

This 200W rack mounting product offers dual outputs of 5V@40A and 12V@0.5A. Supplied to a networks OEM worldwide the product offers full active PFC to EN61000-3-2 D. Features include 90 - 264Vac input, full hot-swap capability, current share for parallel operation, H15 connection to rear, IEC inlet, power on LED, key switch power enable via front panel with interlock and TTL compatible power good signal. Fan cooled.Finished in stylish silver with mounting points to 3 front face. Dimensions 150W x 2U x 140D (mm).

-48VDC DC INPUT VERSION ALSO AVAILABLE

FP700 LAMP BALLAST SUPPLY
(700W lamp supply - medical -Endoscopy )

Supplied to  a medical instrumentation equipment manufacturer (to UL60601-1) the FP700 series offers a 700W supply for lamp applications. Designed specifically for short-arc Xenon technology ( 30kV trigger voltage ) the product is easily adaptable for plasma, laser and other high voltage applications.

Topology utilizes ZVT switching for maximum efficiency, with adjustable current programming via digital potentiometer available. 500W version also available.

Features include mains input auto-select detection, output current & voltage monitor.

 (PFC version also now available - contact sales)

FP450-413
(450W for laser drive : constant I )

Supplied to the medical industry this 450W supply offers up to 4 outputs including 1 programmable constant current output. Features include universal mains input, active power factor correction and output inhibit signal.
Output connections via M6 Studs and molex terminals. Mains input is via screw terminal.

This product was fully tested and approved to UL2601 and CSA to our customers requirements

Dimensions 330 x 62 x 127mm

Custom 19" Rack

One of many custom 19" products manufactured and tailored to customer specification. This particular model is supplied for a telecommunications application requiring a dual / redundant -48Vdc supply at 300W, with universal mains input.

Output terminations via 6 x  ' Ria ' multi-pole sockets, each individually fused with isolation mains switch for each converter.

Other features include volt free powerfail signal for each converter with full convection cooling.

FP300-13 Lamp testing supply
 (300W xenon lamp - medical)

Supplied to a worldwide manufacturer of short-arc xenon lamps with trigger voltage requirements of >30kV, this product offers a fully programmable light source for testing purposes. Programming is via integral LCD display along with further communications support via RS232 interface.

Contact our sales team for details of the extensive features available.

Need a product similar ? We can easily adapt for laser/ plasma or any other high voltage application.

Dimensions : 250 * 300 * 120mm

FP400-310
(400W for broadcast)

Supplied to the broadcasting industry the FP400-310 series offers 400W of power with up to 3 outputs available.

Features include active power factor correction to EN61000 -3-2, IEC mains input, system monitoring signals via 9 way D type plug and low noise fan cooling. Connections via DIN 41612 H15.
Dimensions 300 x 400 x 80mm

FR300-312
(300W for audio mixing console)

Supplied to a major uk manufacturer of audio mixing consoles the FR300-312/2 offers 3 high current outputs of 5V@10A and +/-16V@8A. Features include link selectable mains input, overvolts/over current protection of all outputs and TTL synchronisation input to match the switching frequency of the secondary converter to the application to prevent cross over noise within audio bandwidth.

This version now supplied with additional integral fan cooling for improved performance. Connections via 0.375" Beau screw terminals and dimensions of 300 * 190 * 70mm.

FR100-213
(100W for data application)

Supplied to a 19" rack systems manufacturer the FR100 offers 100W of output power with dual outputs of +/-12Vdc as standard but others available.
Format is 3U * 160mm depth for standard fitting into 19" rack equipment. Features include universal mains input of 90 - 264Vac, power indication LED, mains powerfail signal ( relay ) and 10HP anodised font panel with handle.

Connection via DINN H15 as standard but available with screw terminals if required

FR65-410
(Ex tested for hazardous atmosphere)

This 65W highly compact enclosed product is used within the gas analysis industry and as such fully meets the exposive atmosphere ( type n ) requirements of EN50021/FM3611.

Universal mains input 90 - 264Vac.

Features include quad outputs ( 3 fully regulated - 1 semi regulated ), open collector PF signal, open collector POK signal and universal mains input ( 90-264Vac). Extended pcb for slide mount.

Connections via  96 Way DIN 41612.
Dimensions 170 x 97 x 45mm

 FS150-418
(150W for medical application)

This quad output 150W product supplied to the medical sector for use within a blood analyser application. Features include universal mains input of 90 -164Vac with high peak power requirement to drive high current lamp via 24V output.

4 outputs of 5V@5A, +12V@7A,-12V@1A and 24V@4A .

Connection via Molex 0.156" and minifit junior.

Dimensions : 230 * 115 * 62mm.

Custom 19" Rack system
(For military contract)

We developed our new 1kW rack mounting power supply specifically for an overseas military contract.

As well as providing the individual power supplies we also designed and constructed the whole system which provided a host of features including 4kW of redundant output power.

Features included mains input 90 - 264Vac with full active PFC, powerfail alarm for each module, hot-swap and N + 1 compatible modules. The product was also tropicalised for marine environmental use

IP enclosed products

Over the years we have supplied numerous products for applications involving stringent safety requirements including marine and hazourdous areas, where an enclosure of IP65 rating may be required. Applications range from such as the airline industry ( charging handheld communication equipment ) to University and other educational applications ( for laptop computer battery charging )

 FS250-610
(250W for medical application)

Supplied to the medical equipment industry for use withni a blood analyser the FS250-610 series offers a 250W multi output supply with up to 6 outputs .

Features include mains input auto-select detection, fan cooling and approval to IEC601-1. Connections via 0.156" molex and 9mm screw terminals.
Dimensions approx 229 x 61 x 122mm.

FS200-411
(200W AC/DC DC/DC )

Supplied for a computer application this 200W supply offers 4 outputs to customer specification with input derived from universal mains input or 18 - 50Vdc for battery backup purposes.

Features include mains powerfail signal, input protection via circuit breaker and mains input via IEC inlet. Additional IEC supplied for auxilliary mains outlet.
Dimensions 128 x 138 x 174mm.

FP300-11
(300W lamp supply - medical - dental)

Supplied to  a medical instrumentation equipment manufacturer
( to UL60601-1 ) the FP300-11 series offers a 300W supply for lamp applications. Designed specifically for short-arc Xenon technology ( 30kV trigger voltage ) the product is easily adaptable for plasma, laser and other high voltage applications. Topology utilizes ZVT switching for maximum efficiency, with adjustable current programming via digital potentiometer available.

Features include mains input auto-select detection, output current & voltage monitor.
Dimensions approx 150 x 50 x 115mm.

(PFC version also now available - contact sales)

FR750-620
(750W for printing industry)

Supplied to the printing industry,the FR750-620 series offers 750W of power comprising of 5 low power outputs up to 300W and 1 further output up to 400W.

Features include output enable ( single output only ), input overvoltage protection and sequential output power up/power down.
Dimensions 300 x 140 x 195mm.

FP200-500
(200W for video mixing console)

Supplied to the video processing industry this product offers 5 fully regulated outputs with universal mains input of 90 - 264Vac.

Active power factor correction is provided to EN61000-3-2 D, with additional features of output monitoring signals via IDC 10 way connector for driving indication LED's directly. V1 & 2 are fully isolated from additional outputs for integration into analogue and digital system control applications which require separate ground lines.

Input connection is via Molex 0.156" with output via H15 DINN 41612 for rack mounting.

Dimensions : 290 * 129 * 50mm.

FS70-211 - IP65 rated
(70W for motorway signs)

Supplied to the traffic signalling industry this 70W supply offers full IP65 rating for external or marine applications. Available as either single or dual output format with each output individually over current protected.

Features include universal mains input, LED power ok indication and high quality connection via multipole locking connectors.
Dimensions 198 x 71 x 198mm.

FR200-711
(200W 7 output for printing)

Supplied to the ink jet printing industry this 200W multiple output power supply offers up to 7 outputs including 1 high voltage output up to 600Vdc. Features include mains powerfail ( 5ms detect ) and  inhibit / enable control. Mains input is plug-in link selectable for 115/230Vac operation.
Dimensions 170 x 175 x 65mm.

FP250-510
(250W 5 output for oscilloscope)

Supplied to the test instrument industry this 250W unit offers up to 5 outputs with connection obtained via a loom and 2 x molex plugs. Mains input is obtained via IEC inlet. Features include powerfactor correction to EN61000-3-2, output enable / inhibit, 50Hz TTL clock signal and mains input selection via external slide switch.
Dimensions 267 x 120 x 60mm.

 FP300-410
(Dual redundant 300W for industrial computer)

Supplied to a computer system manufacturer this rack system comprising of 2 x 300W units offers a total of 300W of dual redundant power with up to 4 outputs available.

Features include universal mains input, hot-swap capability, active power factor correction to EN61000-3-2 (D), ORing diodes included in rack assembly for each output for N+1 with power ok and mains powerfail signals available. Mains input via IEC inlet with 2 x IEC mains outlets.
Dimensions 240 x 170 x 225mm.